SECTION 7: RUDDER ASSEMBLY

From RV14 Community Wiki
Jump to navigation Jump to search

Revisions

Date Posted Description Link
N/A Original
2019-11-14 View

Always check VANS Service Information And Revisions for updates

Notes/Links

Page Link Description
Oil canning rudder Notes on oil canning in the rudder that might be caused by rib flanges not at the proper angle
General Rudder twist discussion
7-03 Missing holes on R-405PD Some early parts were missing wholes that need to be match drilled
7-03 Rudder Horn Hole Elongation Describes some causes solutions to hole elongation in thick material
7-03 R-912/R-903 Radius Edges
7-07 Dimpling Stiffeners Use small diameter dimple dies when dimpling the stiffeners
7-12 Rudder TE Riveting Technique

Builder Videos

Builders which publish multiple videos not tied to a specific section of the build are posted linked @ RV14 Org Playlists. For editor access to that channel contact admin@rv14.org.

Link Author Topic
Link Marc Gough Section 7: Van's RV14A Rudder Assembly Time Lapse
Link Andrew Kilroy Playlist containing Andrew Kilroy Rudder related videos
Link Josh Sinclair Playlist containing Josh Sinclair Rudder related videos